| Application Note: pH Measurement In The Headbox |
Control of pH levels in the stock preparation section of
a paper mill is essential to the process of effective
papermaking. Although pH is also controlled upstream
of the headbox, the last opportunity to control the pH
of the pulp slurry occurs at this location. |
10/02/2008 |
61.2 KB |
| Brochure: BRS Backwash Reduction System |
The BRS Backwash Reduction System is a separator specifically designed as a pre-filter for sand media filters |
09/11/2008 |
409.4 KB |
| Case Study: NSK Solves Press Roll Bearing Failure |
Cracked inner rings caused premature failure of Press Roll bearingst a paper mill resulting in excessive downtime. Poor reliability of this critical paper machine resulted in a loss of production and increased maintenance costs. |
09/08/2008 |
822.9 KB |
| Catalog: HPS™ Spherical Roller Bearings |
Introducing the newest series of advanced, high performing spherical roller bearings offering
higher speed and load capacities suitable for a wide variety of industrial applications |
08/29/2008 |
1.13 MB |
| Catalog: SAF Split Pillow Block Housings & Accessories |
NSK pillow blocks are designed for exceptional performance in a wide range of applications. The pillow blocks are
manufactured in a wide variety of sizes out of heavy-duty cast iron |
08/29/2008 |
2.03 MB |
| Case Study: NSK Solves Press Roll Bearing Failure |
Cracked inner rings caused premature failure of Press Roll bearings at a paper mill resulting in excessive downtime. Poor reliability of this critical paper machine resulted in a loss of production and increased maintenance costs.
|
08/29/2008 |
822.9 KB |
| Case Study: Repair Status Tracking |
A global paper company with a mill in Michigan was looking to identify and improve their cost savings program. The mill had a repair and refurbishment program already in place, however, was looking for any improvements NSK could identify. |
08/29/2008 |
784.2 KB |
| Overview: Pre-Krete In Pulp & Paper |
Typical Pre-Krete applications are in Kraft Mills, which produce Kraft Paper. This information is a broad and simplified overview of the operations of a Kraft Mill. Each mill has a unique process and process requirements. Dependent on the application, Pocono Fabricators' Pre-Krete sytems may be able to help. |
07/15/2008 |
33.1 KB |
| Material Safety Datasheet: Pre-Krete G-8 Modified Fine |
Pre-Krete G-8 is an aluminous hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. Wet cement, especially as an ingredient in plastic (unhardened) concrete, mortar, or slurries can dry the skin and cause alkali burns. |
07/02/2008 |
41.4 KB |
| Material Safety Datasheet: Pre-Krete G-8 |
Pocono Fabricators Pre-Krete G-8 is an aluminous hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. It is recommended that the specific application be discussed with the factory or an authorized Pre-Krete representative prior to the installation. |
07/02/2008 |
45.4 KB |
| Technical Datasheet: Pre-Krete G-8 |
Pocono Fabricators Pre-Krete G-8 was developed in 1961. It is an aluminous hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. |
07/02/2008 |
38.7 KB |
| Technical Datasheet: Pre-Krete FS-16 |
Pocono Fabricators' Pre-Krete FS-16 is a non-shrinking, fast-setting, hydraulic calcium aluminate
cement containing 40% hydraulic binder, 40% silica and 20% inert aggregates. FS-16 is an
extremely versatile product with many uses in all industries. It is primarily used as a repair material
for concrete where high compressive strengths are required in a limited amount of time. It is also
used to set and anchor machinery or equipment. |
07/02/2008 |
98.2 KB |
| Material Safety Datasheet: Pre-Krete FS-16 |
Pocono Fabricators' Pre-Krete FS-16 is a non-shrinking, fast-setting, hydraulic calcium aluminate cement containing 40% hydraulic binder, 40% silica and 20% inert aggregates. FS-16 is an extremely versatile product with many uses in all industries. |
07/02/2008 |
52.9 KB |
| Technical Datasheet: Polyseal |
When applied to newly placed Pre-Krete, Polyseal forms a hard moisture retaining film which retards evaporation of water, permitting better curing and higher strength. For use both indoors and outdoors and for structures.
|
07/02/2008 |
95.4 KB |
| Technical Datasheet: Pre-Krete C-17 |
Pocono Fabricators' C-17 Pre-Krete was developed in 1942. It is a calcium oxide hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. It is recommended that the specific application be discussed with the factory or an authorized Pre-Krete representative prior to the installation. This will ensure the system's ability to perform as expected. Pre-Krete C-17 is used to line new equipment and to repair and restore existing equipment. |
07/02/2008 |
92.3 KB |
| Material Safety Datasheet: Pre-Krete C-17 |
Pocono Fabricators' C-17 Pre-Krete is a calcium oxide hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. Hypersensitive individuals may develop an allergic dermatitis. |
07/02/2008 |
41.8 KB |
| Product Sheet: Pre-Krete C-17 |
Pocono Fabricators' C-17 Pre-Krete was developed in 1942. It is a calcium oxide hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry. It is recommended that the specific application be discussed with the factory or an authorized Pre-Krete representative prior to the installation. This will ensure the system's ability to perform as expected. Pre-Krete C-17 is used to line new equipment and to repair and restore existing equipment. |
07/02/2008 |
92.3 KB |
| White Paper: Surface Aeration Revisited |
The intention of this paper is to have a critical review of the theory and practice of today’s Waste Water Aeration
Technology. WWTP aeration processes are designed to promote growth of aerobic microorganisms, which, in turn, reduce the biological demand of the wastewater.
Submitted by Philadelphia Mixing Solutions
|
06/25/2008 |
266.2 KB |
| Brochure: PMSL Testing Facility |
If you are looking for a facility to
test your mixing equipment and
process, Philadelphia Mixing
Solutions has the largest, most
fully-staffed, and continually
operating lab facility in the
world. Our mixing experts have
over 200 years of collective
mixer experience to ensure your
application performance is
handled correctly.
|
06/25/2008 |
122.3 KB |
| White Paper: The New Approach To Paper Chest Mixing |
This paper discusses the rheology and scale-up issues that have created the demand for successful, continuous full-scale reactors with numerous mixing zones. The cost of the installation of a full scale mixer can potentially be returned in as little as one month of operation. Submitted by Philadelphia Mixing Solutions |
06/25/2008 |
649.1 KB |
| Datasheet: Talon |
Philadelphia Mixing Solutions, with its full scale “university grade” (up to 750,000 gallons) testing facility and process knowledge, Philadelphia Mixing Solutions provides efficient biological nutrient removal (BNR) that you can count on. |
06/25/2008 |
250.3 KB |
| Datasheet: CounterFLow |
Philadelphia Mixing Solutions’ Counterflow Impeller offers a higher pumping rate than conventional impellers
because it can efficiently operate at much higher impeller-to-tank diameter ratios. This is of greatest advantage
with shear thinning fluids where stagnancy at the wall can be a problem. Conventional turbines require significantly
greater power to produce flow at the walls. The CFD models below demonstrate this flow patter. |
06/25/2008 |
90.2 KB |
| Datasheet: Raptor |
The Raptor, PMSL’s directional aerator is ideal for industrial or municipal lagoons and basins where aeration and mixing are required. The Raptor may be used in a floating or fixed mounted configuration and is also an excellent method to supplement aeration, mixing, and velocity requirements. |
06/25/2008 |
91.1 KB |
| Datasheet: Pre-Krete Formula C-17 |
Pocono Fabricators' C-17 Pre-Krete was developed in 1942. It is a calcium oxide hydraulic cement designed to provide effective corrosion and/or abrasion resistance against various acids and chemicals commonly found in industry |
04/30/2008 |
85.8 KB |
| Datasheet: Model 6081 Wireless Transmitter For pH And ORP |
The Model 6081-P transmitter is ideal for monitoring
applications, especially in hard-to-reach or cost prohibitive
locations. Model 6081-P measures pH and
ORP and is compatible with most Rosemount
Analytical pH and ORP sensors |
04/01/2008 |
125.5 KB |
