Cl02 Bleach Line Static Mixer

The Komax Chlorine Dioxide High Substitution Bleaching System is now an established and reliable technology used by modern mills worldwide. Our unique "Triple Action Mixer" creates back mixing which produces the high shear that is needed to separate the pulp fibers. Fluidization of the pulp also occurs, allowing excellent chemical contacting which reduces chemical usage.

The Komax Hypo-Chloride make up system uses inline static mixers to replace large, high maintenance, tank type hypo make up systems. 50% caustic solution is injected into a 4" diameter 316 stainless steel static mixer where it is mixed and diluted down to a 10% concentration. The diluted caustic solution up-flows where chlorive gas is injected at the input tee. Fine bubbles of C12 gas are mixed into the main caustic stream by the two section Komax static mixer. The Komax kynar lined static mixers contain a series of solid Kynar mixing elements. This compact system has proven to provide improved gas/liquid contacting over standard tank type make up systems. Komax Hypo units have been installed in Georgia Pacific and International Paper Mills.

Production:
Four inch diameter static mixer system.
Hypo solution outpup: 180 gpm to 250 gpm.

Consistency Control

Komax Systems unique triple action static mixers provide consistency control for stock blending applications. Whether mixing different consistency stock streams together or diluting stock lines with water, our low pressure drop design will always result in a uniform reading from your transmitter. Low cost and long life spans make the Komax solution the most economical for your mill.

Komax Systems, Pulp & Paper Division, P.O. Box 1323, Wilmington, CA 90748. Tel: 310-830-4320; Fax: 310-830-9826.