Product/Service

Pre-Krete FS-16

Source: Pocono Fabricators, A Sauereisen Company

Pre-Krete FS-16
Pocono Fabricators' Pre-Krete FS-16 is a non-shrinking, fast-setting, hydraulic calcium aluminate cement containing 40% hydraulic binder, 40% silica, and 20% inert aggregates. FS-16 is an extremely versatile product with many uses in all industries.

Click here to visit our new Website

Downloads:
Technical Datasheet: Pre-Krete FS-16
Material Safety Datasheet: Pre-Krete FS-16

Pocono Fabricators' Pre-Krete FS-16 is a non-shrinking, fast-setting, hydraulic calcium aluminate cement containing 40% hydraulic binder, 40% silica, and 20% inert aggregates. FS-16 is an extremely versatile product with many uses in all industries. It is primarily used as a repair material for concrete where high compressive strengths are required in a limited amount of time. It is also used to set and anchor machinery or equipment.

  • Readily bonds to concrete and other masonry surfaces.
  • Is easy to use, just add water, mix and trowel.
  • Takes its initial set in 14 minutes, final set in 33 minutes. You can walk on it in 1 hour, drive on it in 3 hours.
  • Resists vibration, abrasion and impact.
  • Resists salts and sulfates preventing deterioration.
  • High density and low moisture absorption prevents spallage and shrinkage.
  • Develops 2,000-pound compressive strength in 3 hours, 5,380 pounds in 28 days.
  • Ideal patch for bridge and highway maintenance.
  • Low absorption prevents corrosive elements from penetrating the substrate.
  • Popular uses include repairs on curbs, sidewalks, drainage ditches, culverts, swimming pools, damns, building foundations, anchoring of machine bases, posts, parking meters, signs, poles, guy wires and setting of stone, blocks, bricks, patio blocks.

Downloads:
Technical Datasheet: Pre-Krete FS-16
Material Safety Datasheet: Pre-Krete FS-16