Product/Service

Dielectron

Source: MEC Environmentally Safe Industrial Chemicals/Maintenance Equipment & Chemicals
High purity isoparaffinic petroleum solvent that is odorless & relatively high boiling
  • High purity isoparaffinic petroleum solvent that is odorless & relatively high boiling.
  • Conforms to regulations 21CFR 172.884 as a high purity, non-corrosive, light petroleum hydrocarbon.
  • High chemical purity, flash over 142E TCC & high dielectric constant with low toxicity, and other attractive properties for many industrial cleaning uses.
  • High purity means absolutely no residue drying.
  • No inhalation hazards.
  • Excellent on electrical switches, gears, & motors.
  • Can be used in part washers & dip tanks.
  • Will not react with or darken aluminum.
  • Low vapor pressure of 8mm, which means VOC's are less than regulated levels.
  • Quick drying.

    DIRECTIONS: Apply by dipping, brushing or coarse spraying. Use minimum required doing the job. Excess solvent can be wiped off allowed to evaporate from the cleaned surface.

    SOLVENT RECOVERY & REUSE: For most economical use, recover the spent solvent by distillation. If spent solvent has been used to remove nonvolatile and stable oils, greases, or solid soils, recover by atmospheric distillation. If solvent contains moisture, or un-reacted volatile monomers, or other solvents, you should distill and discard the light ends and keep only the portion distilled between 370-400E for high dielectric purity. Since flash point is 142F, DIELECTRON must be distilled with grounded distillation equipment located in an explosive proof area and designed for safe combustible solvent recovery.

    FOR INDUSTRIAL USE ONLY
    CAUTION:     *Do not use near fire, sparks, or other sources of combustion. Use only in ventilated areas. Store in closed containers or covered tanks. Keep out of reach of children. Always make sure of laboratory scale distillations before attempting plant scale recovery, unless you are sure of the nature of the soils it has removed.

    MEC Environmentally Safe Industrial Chemicals/Maintenance Equipment & Chemicals, 625 Simmons Lane, Johnstown, PA 15909. Tel: 814-322-1399; Fax: 814-322-3650.