Impco HI-Q Fine Screen

The HI-Q Fine Screen provides efficient and economical shive and dirt removal from a pulp stream under varied operating conditions in all kinds of screening systems. The HI-Q Fine Screen capitalizes on the advances in fine slot screen- plate technology. The innovative Stingray Rotor makes it possible to operate at any accepts con- sistencies up to 4% on softwood and 5% on hardwood, while utilizing 0.2 mm (0.008") and 0.15 mm (0.006") or smaller slotted screenplates.

Key Benefits

• Stingray Rotor promotes the highest screening efficiency possible
• Minimum maintenance
• Stability of operation and low specifc power consumption
• The bearing assembly is interchangeable with the HI-Q Knotters, Rejects Separators and Trash Screens

Applications

• Shive and dirt removal from all chemical, mechanical, waste paper pulp and paper making fibers.
• Fine slot screening to remove shives, dirt, vessels and plastics.
• Perforated or slotted; grooved, dimpled or smooth screenplate technology.
• Stingray Rotor and fine slot screenplate tech- nology is available for retrofit of older model HI-Q Fine Screens, Centrisorters and many other pressure screens.

Maintenance

• The screen rotor is mounted on a sturdy vertical shaft supported by self purging, grease lubri- cated, heavy duty bearings.
• Chromium hard surfacing is applied to all grooved slotted screenplates and may be option- ally applied to any other screenplate.
• To minimize spare parts inventory, the bearing assembly is interchangeable with the HI-Q Knotters, Rejects Separators and Trash Screens.

GL&V Pulp and Paper Group, 1000 Laval Blvd., Lawrenceville, GA 30043. Tel: 770-963-2100; Fax: 770-963-4155.