ProJet has completed the successful start-up of its 5 Pro Cleaners Type F systems at Modern Karton, PM1. Fajar’s PM1 produces Board made from 100% OCC on a 4500mm wide machine. OCC is known for its extreme contamination on the Forming Fabrics, which is exactly the reason that Modern Karton chose ProJet. ProJet’s Cleaners stand out in cleaning efficiency and highest reliability.
Despite COVID19 travel restrictions, ProJet continues to fully support customers throughout the world for service and start-ups. Pak-Adang, Operations Manager of PM1 at Fajar said: ”ProJet’s Team was highly flexible in scheduling this start-up and ProJet’s engineers are highly knowledgeable and experienced. All this lead to a smooth and trouble-free start-up.”
The Pro Cleaner Type F (Forming Fabrics) uses a traversing cleaning head that contains multiple nozzles. With a high cleaning pressure and a cleaning width of 200mm (8”) almost three times the cleaning area is covered in the same amount of time as conventional oscillating showers.
Furthermore, the Pro Cleaner, Type F, delivers the following operational and performance benefits:
- Substantial cleaning water savings (= operational cost reduction + improved profitability): the Pro Cleaner provides superior cleaning performance, while only consuming 1.3gpm (5.0 liter/min) of water. A conventional oscillating shower consumes over 100gpm of water, leading to substantial more electrical power and waste water treatment costs.
- Water mist elimination is achieved by the application of air knives that contain water mist and contamination, which is discharged through Venturi tubes and finally into a save all pan.
- Targeted cleaning enables an operator to control the Cleaner for not only overall CD fabric/felt cleaning but to also apply targeted zone/strip or edge cleaning.
ProJet is represented by PT. Startika. in Indonesia. Startika has been assisting the Indonesian paper industry for the last 30 years, striving to help Indonesian Paper mills gear up and adopt technology driven productions. Startika has been bringing new and latest technology to the Indonesian paper mills, which has a direct influence on paper quality and machine run ability.
ProJet Technologies understands that each client application is unique. For that reason, ProJet developed an automated ROI-calculator that will be applied to each application and produced paper grade. ProJet will perform a no-charge ROI calculation of any Forming Fabric, Press Felt or Dryer Fabric application. After inputting the process parameters provided by customers, they will be provided with a ROI-Analysis of each specific application and investment justification.