Purge

Removal of paint & resins from application lines before they set up.

Product Highlights:
Flash point of 210 F.

Water soluble for ease of extinguishing fire.

Does not contain hazardous chlorinated solvents, or toxic / flammable esters or ketones used in most line purge solvents.

Low human & aquatic toxicity.

Biodegradable & environmentally safe.

Directions: Place solvent in a soak tank or drum. Keep container covered at all times to keep moisture from the air or other contaminants out of the solvent. Solvent blend is miscible with water & hydroscopic. Submerge part to be cleaned in solvent until unset paint & resin is released or dissolved. Run solvent through lines and spray heads until clean. Blow or pump solvent out of lines before reuse. Wipe off residues. Spent solvent can be recovered for reuse by distillation at 230 C or under vacuum at lower temperatures.

FOR INDUSTRIAL USE ONLY
CAUTION: Keep out of reach of children. Combustible! Store in a safe place away from extreme heat and open flames. If eye contact occurs, wash with water until irritation stops. If persists, see a physician. Wear butyl rubber or Teflon gloves to avoid prolonged skin contact. Wash from skin with soap and water. Wash contaminated clothing before reuse.

MEC Environmentally Safe Industrial Chemicals/Maintenance Equipment & Chemicals, 625 Simmons Lane, Johnstown, PA 15909. Tel: 814-322-1399; Fax: 814-322-3650.