Series F Conveyor
The Rapat Series F Conveyor is a rubber belt conveyor designed for gentle handling of bulk materials such as seed, beans, fertilizer, earcorn, etc. The conveyor can elevate up to a 40 degree incline. The rubber flights are hot vulcanized to the rubber belt and convey the materials without cracking or grinding. The Rapat Series F Conveyor is versatile! Installation options range from wheel undercarriages to permanent leg assemblies, to pivot wheel assemblies for specialized uses. It is easy to move and clean. Formed steel covers provide sun and wind protection for your products. The 18in. wide belt will handle approximately 2,500 BPH. The 24in. wide belt will handle approximately 3,500 BPH. Capacities are based on a 30 degree angle and may vary. Please consult your Rapat representative to determine the best solution for your needs.
Series F Specifications
Lengths: 20ft. to 70ft. in 10ft. increments.
Belt: 18in. or 24in. wide with 2in. high molded cleats on 12in. centers.
Drive: Positive gearbox and shaft drive with roller chain final drive.
Frame: Formed and welded steel frame with self- cleaning bed and inclined sides to form trough.
Power: Conveyor can be driven by electric or hydraulic motor, gas engine or PTO.
Undercarriage: Heavy- duty undercarriage complete with manual winch, removable towing hitch, and rims and tires.
Pulleys: 8in. diameter machined head pulley with vulcanized lagging and drum type tail pulley.
Covers: Removable steel covers with inlet hopper and discharge spout standard.
Rapat Corporation, Hawley Industrial Park, 919 O'Donnell Street, Hawley, MN 56549. Tel: 218-483-3344; Fax: 218-483-3535.