The ADI Anaerobic Modular Reactor (AMR)
Source: Paques ADI Inc.
The proprietary ADI-AMR is a packaged anaerobic wastewater pretreatment system for high-strength wastewater.
The proprietary ADI-AMR is a packaged anaerobic wastewater pretreatment system for high-strength wastewater. It combines both suspended- and attached-growth processes in an upflow hybrid reactor. This design ensures maximum solids retention and minimum hydraulic retention time. It is ideally suited for small flow (typically under 50,000 USgpd; 200 m3/d), warm, high-strength, soluble waste streams. Simple Operation
- fully automated controls
- simple hydraulics
- few operational parameters Saves Energy
- no oxygen supply
- low pumping requirements Low Residual Solids
- low biological yield rates
- stabilized solids wasted directly from the reactor Small Space Required
- high volumetric loading rates
- compact modular design Quick Supply and Installation
- produced in just a few weeks under shop conditions
- installed and commissioned in weeks rather than months Tolerant of Extended Shutdown
- can handle shutdowns of weeks
- rapid restart without reseeding No Airborne Particulates/Odors
- completely enclosed vessels
- no aeration equipment
- biogas burned in a flare
Advantages:
- fully automated controls
- simple hydraulics
- few operational parameters
- no oxygen supply
- low pumping requirements
- low biological yield rates
- stabilized solids wasted directly from the reactor
- high volumetric loading rates
- compact modular design
- produced in just a few weeks under shop conditions
- installed and commissioned in weeks rather than months
- can handle shutdowns of weeks
- rapid restart without reseeding
- completely enclosed vessels
- no aeration equipment
- biogas burned in a flare
Included in each package:
The anaerobic modular reactor comes complete with all internal piping, valves, pumps, media, insulation, piping enclosure, gas safety equipment, and accessory items required to provide a working treatment system that is ready for start-up.
As with all ADI's wastewater treatment packages, our specialists are available to assist operators via phone, fax, and email. Your system is a major investment, and we will make every effort to ensure you are pleased with your investment.
Paques ADI Inc., 182 Main Street, Unit 6, Salem, NH 03079. Tel: 603-893-2134; Fax: 603-898-3991.