Tom-Pac Bearing Gel is a 100% synthetic, polyalpha olefin, state of the art lubricant, formulated to reduce friction and wear. Tom-Pac Bearing Gel will not melt, drip or carbonize. It provides corrosion protection, seals bearings from water and contamination, retains its stucture and consistency while in service and remains stable under high shear and high temperature. Tom-Pac Bearing Gel contains no soap additives and no harsh fillers. It will not emulsify and will perform exceptionally well in wet applications. It is virtually waterproof!
Choose TP-2557 for industrial use.TP-2557 Industrial Bearing Gel is tenacious, resilient lubricant that greatly extends lubrication intervals and cuts production losses due to premature bearing failure. Tom-Pac Gels reduce downtime and improve the performance of the equipment making their use extremely cost effective.
How to apply:
Tom-Pac Bearing Gel is applied in the same manner as conventional grease, with the bearing cavity being filled to approximately 1/3 capacity in most cases. Remember that Tom-Pac Bearing Gel will last much longer than a conventional lubricant and adjust intervals accordingly
Tom-Pac Bearing Gel is compatible with conventional grease. However, the mixture will fall short of the properties of the Gel. For that reason, we strongly advise that, if at all possible, the old grease be purged or cleaned out before using the Bearing Gel for optimum performance, longevity and yield.
Tom-Pac Bearing Gel is available in cartridges, 25 lb pail, 120 keg and 400 lb drum.
Tom-Pac Inc., 7575 Trans-Canada Hwy., Suite 500, St-Laurent, PQ H4T 1V6. Tel: 514-332-4763; Fax: 514-684-4802.