Weller 400 DS Desulfurized Alloy Plate

Weller 400 DS is a high strength wear plate developed to meet the need for an industrial grade with a high hardness. Weller 400 DS offers significant initial cost savings over other alloy bearing abrasion resistant grades.

The physical properties assure dependability and increased service life. Atmospheric corrosion resistance coupled with good abrasion resistance of Weller 400 DS enhances its application economies because load-carrying capacity will be retained over extended periods.

Representative Mechanical Properties

Tensile Strength ..................185,000
Yield Point .......................152,000
Elongation ............................16%
Reduction of Area .....................50%
Hardness Brinell...................385-420

Benefits

• Excellent abrasion resistance

• Impact resistance for shock applications

• High tensile strength coupled with abrasive resisting roperties

• Permits the user to substitute lighter thicknesses than possible with mild carbon plate.

• Easily welded - Stress relieving not required after welding in most applications

• Can be drilled with standard high speed drills and cold formed

• Retain hardness at high temperatures

• Work hardening coefficient enhances service life

Available Sizes

1/8" thru 3" thick: 48" thru 96" wide: 96" thru 288" long

Weller 400 DS is also available in pre-cut and drilled truckbed liners. Liners fabricated to specifications with tapered plug weld holes.

Welding Specifications

Use low hydrogen high tensile electrodes
AWS specifications: E100XX, E110XX, or E120XX rods