One of the most common processes in wastewater treatment is the activated sludge method, which biologically treats the wastewater through the use of large aeration basins. This process requires the pumping of compressed air into the aeration basins where a diffuser system ensures the air is distributed evenly for optimum treatment. The energy needed to provide compressed air is a significant cost in the operation of a wastewater treatment plant.
FCI’s MT Series Multipoint Mass Flowmeters are ideal for today's most challenging industrial air or gas handling applications and continuous emissions monitoring systems (CEMS)
Fluid Components International solves flow and level measurement applications for industrial process and plant applications using both patented thermal dispersion and Coriolis flow measurement technologies. With more than 40 years experience and the world’s largest installed base of thermal dispersion instruments, you can count on FCI to know your application and have proven solutions that will save you time and expense. From off-the-shelf products to custom engineered products and systems, FCI has the selection and an unequalled record of innovations to supply the optimal product for your application. From single-point to multi-point flow meters, from basic air flow to complex mixed, variable flare gas compositions, from water to the harshest of chemicals, FCI products will deliver superior accuracy, repeatability and long-term reliability at the lowest installed cost. By Fluid Components International
Cartiere di Tivoli papermill, headquartered in Villa Adriana, Tivoli, Italy, produces jumbo paper for corrugated board and tissue for industrial use. The plant produces over 300 ton/d of paper products. The plant’s wastewater treatment equipment was outdated and the discharge did not meet permit levels.
MacLaren Industries' kraft pulp mill, located in Thurso, Quebec was built in 1958 and used only a primary treatment process for treatment of its pulp waste until the mid 1990s. It was at this time that more stringent effluent requirements for BOD5 were defined for discharge into the nearby Ottawa River. To meet the new requirements and to make a commitment in protecting the environment, MacLaren decided to employ a secondary treatment process
Fluence provided the right solution for this paper mill to meet stringent permit discharge limits and produce renewable energy.
Fluence is an expert in the implementation of aerobic treatment systems that treat wastes from a range of industries, including industrial processors such as paper and pulp mills.
Advanced on-line instrumentation provides continuous, real time suspended solids measurement in “Dissolved Air Flotation” (DAF) operations, which automates and optimizes polymer and coagulant feed regardless of wide load variations. The result: potential polymer savings of 20 to 30%.
Pronal, a recycled paper plant, produces craft paper. The plant produces an average flow of 14,000 m3/day (3.7 MGD) of wastewater with high contents of Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD) and Total Suspended Solids (TSS).
The Hach analytics porftfolio is designed to give you confidence. From a simple, dedicated meter to on-line measurement or wastewater treatment optimization, our solutions are based on years of innovation and a desire to provide the simplest way to results you can trust.
|
|
|
|
|
|
|
|
|